UniLight 10mm Strobe Light Module 8V/2S 30Wx3 - White STRB5-300x3-8V
UniLight 10mm Strobe Light Module 8V/2S 30Wx3 - White STRB5-300x3-8V
Strobe chips as a solution for DIY enthusiasts
Extremely powerful strobe chips on high-power aluminium substrates. May only be operated with short strobe pulses without further cooling.
Reliable visibility over many hundreds of meters.
Equipped with 1m silicone cable and pre-configured resistor for 2S
includes an optional 12mm cover cap
includes an optional 12mm cover cap
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 8V/2S LiPo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
Technical Data:
Performance: 12W reference power with x3-Technik,
Voltage: 8V only, 3.5A
Beam angle: ~120°
Light intensity: ~2100 lumen RED
Light intensity: ~2800 lumen GREEN
Light intensity: ~3325 lumen WHITE
Dimensions: 10x50mm
Weight: 4g (without cable)
$16.34
Original: $46.69
-65%UniLight 10mm Strobe Light Module 8V/2S 30Wx3 - White STRB5-300x3-8V—
$46.69
$16.34Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
UniLight 10mm Strobe Light Module 8V/2S 30Wx3 - White STRB5-300x3-8V
Strobe chips as a solution for DIY enthusiasts
Extremely powerful strobe chips on high-power aluminium substrates. May only be operated with short strobe pulses without further cooling.
Reliable visibility over many hundreds of meters.
Equipped with 1m silicone cable and pre-configured resistor for 2S
includes an optional 12mm cover cap
includes an optional 12mm cover cap
The reference power is a comparison value between our offered lights. It normally refers to an operating voltage of 8V/2S LiPo and is dependent on bulbs, operating mode and technology.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be added. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Pay always attention to the operating temperature, we do not assume any warranty in case of overheating.
Note: The LED lights are extremely bright! Never look directly into a LED!
Technical Data:
Performance: 12W reference power with x3-Technik,
Voltage: 8V only, 3.5A
Beam angle: ~120°
Light intensity: ~2100 lumen RED
Light intensity: ~2800 lumen GREEN
Light intensity: ~3325 lumen WHITE
Dimensions: 10x50mm
Weight: 4g (without cable)
